Amer Networks SS2R48G4i V2 - Manual (Page 52)

SS2R24G4i/SS2R48G4i
41
1. SSH Server Configuration
Command Explanation
Global Mode
ssh-server enable
no ssh-server enable
Enable SSH function on the switch; the
“no ssh-server enable” command
disables SSH function.
ssh-user password {0|7}
no ssh-user
Configure the username and password of
SSH client software for logging on the
switch; the “no ssh-user
“ command deletes the
username.
ssh-server timeout
no ssh-server timeout
Configure timeout value for SSH
authentication; the “no ssh-server
timeout
” command restores the default
timeout value for SSH authentication.
ssh-server authentication-retires <
authentication-retires>
no ssh-server authentication-retries
Configure the number of times for retrying
SSH authentication; the “no ssh-server
authentication-retries
” command
restores the default number of times for
retrying SSH authentication.
ssh-server host-key create rsa
modulus
Generate the new RSA host key on the
SSH server.
Admin Mode
monitor
no monitor
Display SSH debug information on the
SSH client side; the “no monitor”
command stops displaying SSH debug
information on the SSH client side.
5.2.3.3 Commands for SSH
5.2.3.3.1 ssh-server enable
Command ssh-server enable
no ssh-server enable
Function Enable SSH function on the switch; the “no ssh-server enable” command disables SSH
function.
Command mode Global Mode
Default SSH function is disabled by default.
5.2.3.3.2 ssh-user
Command ssh-user password {0|7}
no ssh-user