Amer Networks SS2R48G4i V2 - Manual (Page 137)

SS2R24G4i/SS2R48G4i
126
Parameters send represents sending packets; receiverepresents receiving packets; all represents
receiving and sending packets; is the name of interface.
14.4.1.8 debug aaa detail
Command debug dot1x detail {pkt-send|pkt-receive|internal|userbased|all} interface {[ethernet]
}
no debug dot1x detail {pkt-send|pkt-receive|internal|userbased|all} interface {[ethernet]
}
Function Enable the detail debug information of dot1x; the ” no debug dot1x detail {connection |
event | attribute interface {[ethernet] }}” command is tgo disable the detail debug
information of dot1x.
Command Mode Admin Mode
Parameters pkt-send represents the detail of sending packets; pkt-receive represen the details of
receiving packets; internal represents internal details; userbased represents the user-based
information; all represents all the detailed informations; is the name of interface.
14.4.1.9 debug dot1x error
Command debug dot1x error
no debug dot1x error
Function Enable the information on debug error of dot1x;the “no debug dot1x error
” disable the information on debug error of dot1x.
Parameters None
14.4.1.10 debug dot1x packet
Command debug dot1x packet {send|receive|all} interface {[ethernet] }
no debug dot1x packet {send|receive|all} interface {[ethernet] }
Function Enable the information on receiving/sending packets of dot1x; the “ no debug dot1x packet
{send|receive|all} interface {[ethernet] } ” command is to disable the information on
receiving/sending packets of dot1x.
Command Mode Admin Mode
Parameters Send represents sending packets; receiverepresents receiving packets; all represents
receiving and sending packets; is the name of interface.
14.4.1.11 debug dot1x detail
Command debug dot1x detail {pkt-send|pkt-receive|internal|userbased|all} interface {[ethernet]
}
no debug dot1x detail {pkt-send|pkt-receive|internal|userbased|all} interface {[ethernet]
}
Function Enable the detail debug information of dot1x; the ” no debug dot1x detail {connection |
event | attribute interface {[ethernet] }}” command is tgo disable the detail debug
information of dot1x.