Amer Networks SS2R48G4i V2 - Manual (Page 136)

SS2R24G4i/SS2R48G4i
125
displayed.
Command mode Admin Mode
Displayed information Explanation
Global 802.1x Parameters Global 802.1x parameter information
free-resource Free resource
reauth-enabled Whether re-authentication is enabled or not
reauth-period Re-authentication interval
quiet-period Silent interval
tx-period EAP retransmission interval
max-req EAP packet retransmission interval
authenticator mode Switch authentication mode
Mac Filter Enables dot1x address filter or not
MacAccessList Dot1x address filter table
dot1x-EAPoR Authentication method used by the switch (EAP relay,
EAP local end)
dot1x-privateclient Whether enable private client
dot1x-unicast
Whether enable unicast
802.1x is enabled on ethernet
0/0/8 Indicates whether dot1x is enabled for the port
Authentication Method Port authentication method (MAC-based, port-based)
Status Port authentication status
Port-control Port authorization status
Supplicant Authenticator MAC address
Max User Number Max user number of the port
Notify DCBI Whether has successfully notificated DCBI server or
not.
14.4.1.6 debug aaa error
Command debug aaa error
no debug aaa error
Function Enable the debug error information of aaa; the “n no debug aaa error” command is used to
disable the debug error information of aaa.
Command Mode Admin Mode
Parameters None
14.4.1.7 debug aaa packet
Command debug aaa packet {send|receive|all} interface {[ethernet] }
no debug aaa packet {send|receive|all} interface {[ethernet] }
Function Enable the information on receiving/sending packets of aaa; the “no debug aaa packet
{send|receive|all} interface {[ethernet] }” command is used to disable the information
on receiving/sending packets of aaa.
Command Mode Admin Mode