2 show snmp status, 3 show snmp engineid – Amer Networks SS2R48G4i V2 User Manual
Page 65

SS2R24G4i/SS2R48G4i
54
maximum packet size
Maximum length of SNMP packets.
no
such
name
errors
Number of packets requesting for
non-existent MIB objects.
bad
values
errors
Number of “Bad_values” error SNMP
packets.
general errors
Number of “General_errors” error SNMP
packets.
response PDUs
Number of response packets sent.
trap PDUs
Number of Trap packets sent.
5.4.6.1.2 show snmp status
Command show snmp status
Function
Display SNMP configuration information.
Command mode
Admin Mode
Displayed information
Description
System Name
Switch name
System Contact
Contact mode
System Location
Switch Location
Trap disable
Disable Trap Function
RMON enable
Enable RMON Function
Community Information
Community Information
Security IP is Enabled
Enabled Security IP Function
V1/V2c Trap Host Information
Receive V1/V2c Trap Host Information
V3 Trap Host Information
Receive V3 Trap Host Information
5.4.6.1.3 show snmp engineid
Command show snmp engineid
Function
Display the engine ID commands
Command Mode
Admin Mode
Displayed Information
Explanation
SNMP engineID
Engine number
Engine Boots
Engine boot counts