Welltech VoIP ATA series V.2.1 - Manual (Page 91)

ATA-171/172/171P/171M/171+/172+
User’s Guide
Figure 2
Codec Type Display the value of Codec ID information. Provides G726-16，
G726-24，G726-32，G726-40，RFC2833，iLBC information.
G726-16 ID Display G726-16 ID information.
ID Display the current ID: 23. When changing the ID, please close
(Defaul Value) column. Only numerals are accepted. Data range
(95~255). Maximum length: 3 bytes.
Default Value 23.
G726-24 ID Display G726-24 information.
ID Default: 22. Only numerals are accepted. Data range (95~255).
Maximum length: 3 bytes.
Default Value 97.
G726-32 ID Display G726-32 information.
ID Default: 2. Only numerals are accepted. Data range (95~255).
Maximum length: 3 bytes.
Default Value 23.
G726-40 ID Display G726-40 information.
ID Default: 21. Only numerals are accepted. Data range (95~255).
Maximum length: 3 bytes.
Default Value 21.
RFC 2833 ID Display RFC 2833 information.
ID Default: 101. Only numerals are accepted. Data range
(95~255). Maximum length: 3 bytes.
Default Value 101.
iLBC ID Display iLBC information.
ID Default: 97. Only numerals are accepted. Data range (95~255).
Maximum length: 3 bytes.
Default Value 97.
Submit [Button] Submit the change.
Reset [Button] Clear the change.
7.4.3 Operate Instruction
Step 1: On the main page, select [SIP Settings Codec ID Settings], enter [Codec ID Settings]
page, after revising the information (e.g.: RFC 2833 ID Default Value: Disable，ID: 96) (See
Figure 1) click [Submit].