Welltech VoIP ATA series V.2.1 - Manual (Page 74)

ATA-171/172/171P/171M/171+/172+
User’s Guide
6.8.1 PPTP Settings
6.8.1 Function
PPTP Settings provide PPTP Server information.
Please use LAN to enter PPTP.
6.8.2 Instruction
Figure PPTP Setting
PPTP Default: OFF. When setting ON, start PPTP function.
PPTP Server Input PPTP Server information, can be IP Address or Domain
Name. Format: xxx.xxx.xxx.xxx. Maximum length is 63 bytes.
PPTP Username Input PPTP Server user’s name, can be numerals or strings.
Maximum length is 63 bytes.
PPTP Password Input PPTP password, can be numerals or strings. Maximum
length is 63 bytes.
Submit [Button] Submit the change.
Reset [Button] Clear the change.
6.8.3 Operate Instruction
Step 1: On the main page, select [Network Setting  Network SettingPPTP Setting], enter [PPTP
Setting] page, after revising tone information (Figure 1), then click [Submit].
(Figure 1)
Step 2: After saving change, enter [Note Information] page, “Note Information” will be seen,
then the changing will come into effect.
Step 3: On the main page, select [Save Change] item, enter [Save Changes] page, and execute
the saving command by click [Save]. [Note Information] page will be seen which means
saving successfully. And the system will be restarted, please wait for a while.
Step 4: To view [PPTP Server] information though Ethereal (See Figure 2)