Welltech VoIP ATA series V.2.1 - Manual (Page 54)

ATA-171/172/171P/171M/171+/172+
User’s Guide
5.14.1 Alarm Settings
5.14.1 Function
Alarm Settings provides the alarm function.
5.14.2 Instruction
Figure Alarm Setting
Alarm Default: OFF. When setting ON, alarm function will execute.
Duration is 1 minute. Stop the alarm by pick up the handset.
Alarm Time Default: 0:0. (O hour: 0 Minute). Time format: 24
Hours.( hh:mm)
Current time Show the alarm time of the next time. Format 2006-10-05
17:47
Submit [Button] Submit the change.
Reset [Button] Clear the change.
5.14.3 Operate Instruction
Step 1: On the main page, select [Phone Setting
 Alarm Setting], enter [Alarm Setting] page,
after revising information (e.g. Alarm: On, Alarm Time: 12:59) (See Figure 1), then click
[Submit].
(Figure 1)
Step 2: After saving change, enter [Note Information] page, “Note Information” will be seen,
then the changing will come into effect.
Step 3: On the main page, select [Save Change] item, enter [Save Changes] page, and execute
the saving command by click [Save]. [Note Information] page will be seen which means
saving successfully. And the system will be restarted, please wait for a while.
Step 4: At 12:59, the alarm will start to work, and last 1min. After 1 min, the alarm will
stop. During ringing, pick up the phone, the alarm will stop automatically.