Welltech VoIP ATA series V.2.1 - Manual (Page 5)

ATA-171/172/171P/171M/171+/172+
User’s Guide
Keypad Interface for The ATA
You can use the PSTN phone keypad to operate the ATA. Please follow the instruction to
configure your terminal adapter.
Group IVR Action IVR Menu Choice Parameter(s) Notes:
Function
Dial out from
PSTN Line
0＊ None
Press 0* can pass call to PSTN Line,
user can dial out from PSTN Line.
(For
171P and 171M)
Function
Unlock keypad
setting
#190# None
After you unlock keypad setting, then
you may configure the ATA.
Function Reboot #195# None
After you hear “Option Successful,”
hang-up. The system will reboot
automatically.
Function Factory Reset #198# None
System will automatically reboot.
WARNING: ALL “User-Changeable”
NONDEFAULT SETTINGS WILL BE
LOST! This will include network and
service provider data.
Function
Enable PPTP
client
#116# None
System will automatically reboot and
PPTP client will be enabled
Function
Disable PPTP
client
#117# None
System will automatically reboot and
PPTP client wll be disabled
Function Enable VLAN #118# None
System will automatically reboot and
VLAN will be enabled.
Function Disable VLAN #119# None
System will automatically reboot and
VLAN will be disabled
Function
Enable Call
Waiting
#138# None
System will automatically reboot and
Call Waiting will be enabled.
Function
Disable Call
Waiting
#139# None
System will automatically reboot and
Call Waiting will be disabled.
Function
Enable
Anonymous
#140# None
System will automatically reboot and
Send Anonymous CID will be enabled.
Function
Disable
Anonymous
#141# None
System will automatically reboot and
Send Anonymous CID will be
disabled.
Function Blind Transfer #510# None
Can only be performed in a phone call
conversation. For 171M, this will
transfer the current IP line to another IP
line.
Function Attendant Transfer #511# None
Can only be performed in a phone call
conversation. For 171M, this will
transfer the line to IP from PSTN (must
be in IP mode to execute this
command)
Function
3-way calling (IP
Conference)
#512# None
Can only be performed in a phone call
conversation.
Function Attendant Transfer #514# None
Can only be performed in a phone call
conversation. For 171M, this will
transfer the line to PSTN from IP (must
be in PSTN mode to execute this
command)
Info
Check WAN IP
Address
#126# None
IVR will announce the current WAN IP
address of the ATA
Info
Check LAN IP
Address
#120# None
IVR will announce the current LAN IP
address of the ATA
Info Check IP Type #121# None
IVR will announce if DHCP in enabled
or disabled.
Info
Check the Phone
Number
#122# None
IVR will announce current in use VoIP
number
Info Check Network #123# None IVR will announce the current network