Welltech VoIP ATA series V.2.1 - Manual (Page 121)

ATA-171/172/171P/171M/171+/172+
User’s Guide
System Log
Server
Display the system Log Server information, send System Log to
the Server. Can be IP Address or Domain Name Address.
Format: xxx.xxx.xxx.xxx; Maximum length: 63 bytes.
System Log Type Default: None. Provides None，Call Statistics，General Debug，
Call Statistics + General Debug，SIP Debug，Call Statistics + SIP
Debug，General Debug + SIP Debug，All mode.
Submit [Button] Submit the change.
Reset [Button] Clear the change.
Figure 2: Phone equipment (included: Phone+FXO)
Figure 2
ICMP Not Echo Default: No. when setting YES, ICMP Not Echo function will be
active.
Send Anonymous
CID
Default: No. When setting YES, send out CID cannot be found by
another person. Your Register Proxy server must support this
function.
Send Flash event Default: Disable. Provides Disable，DTMF Event，SIP Info modes.
Encryption Type
Default: Disable. Provides Disable ， INFINET ， AVS ，
WALKERSUN1 ， WALKERSUN2 , CSF1, CSF2, GX, VGX, RC4
modes.
Your Register Proxy server must support this function.
Encryption Key Set encryption password。Only support GVX encryption format,
maximum data: 63 bytes.
PPPoE retry
period Default: 223 (Seconds)； setting how long it takes for PPPoE
retry when PPPoE failed. Only numbers are accepted, data
range: (5~255), maximum length: 3 bytes.
System Log
Server Display the system Log Server information, send System Log to
the Server. Can be IP Address or Domain Name Address.
Format: xxx.xxx.xxx.xxx; Maximum length: 63 bytes.
System Log Type Default: None. Provides None，Call Statistics，General Debug，
Call Statistics + General Debug，SIP Debug，Call Statistics + SIP
Debug，General Debug + SIP Debug，All mode.
Submit [Button] Submit the change.
Reset [Button] Clear the change.