Welltech VoIP ATA series V.2.1 - Manual (Page 18)

ATA-171/172/171P/171M/171+/172+
User’s Guide
Chapter 5.1 Phone Setting
Provides Forward Setting, SNTP Setting, Volume Setting, DND Setting, Caller ID
Setting 【 2】 , Auto Answer 【 3】 , Auto Dial Setting, Dial Plan, Flash Time Setting 【 2】 ,
Call Waiting Setting, Soft-Key Setting 【 1】 , Hotline Setting, Alarm Setting, T.38 Setting
【
2】 .
5.1.1 Forward Setting
5.1.1 Function
Forward the calling to dedicated phone number. Here provide All Forward, Busy
Forward and No Answer Forward function. Before setting this forward function, please
make sure service providor can support this function.
5.1.2 Instruction
Figure 1: FXS or Phone equipment
All forward Default: Off. When setting On, all incoming calls will be
forwarded, in support of IP mode.
Busy Forward Default: Off. When setting On, and the line is busy, it will run to
support IP mode.
No Answer
Forward Default: off. When setting On and there is no body answer the
phone, it will run to support IP mode.
All Fwd No. All incoming calls will be forwarded.
Name Show or Input the name.
URL Number Show or input the dialing information, can be Login Account, IP
Address or PSTN Numbers, maximum length is 63 bytes.
Busy Fwd No. Forward the call when line is busy.
Name Show or set the name.
URL Number Show or input the dialing information, can be Login Account, IP
Address or PSTN Numbers, maximum length is 63 bytes.
No Answer Fwd
No.
Forward the call when nobody answers the phone.
Name Show or set the name.
URL Number Show or input the dialing information, can be Login Account, IP
Address or PSTN Numbers, maximum length is 63 bytes.
No Answer Fwd
Time Out Default: 3(Ring), when ringing 3 times but no one answers, it is
regarded as no one answers the call. Data Range: (2~8 Ring). . .
Maximum length is 2 bytes.
Submit [Button] Enforce the command of saving chance.