Welltech VoIP ATA series V.2.1 - Manual (Page 6)

ATA-171/172/171P/171M/171+/172+
User’s Guide
Mask mask of the ATA.
Info
Check Gateway IP
Address
#124# None
IVR will announce the current gateway
IP address of the ATA.
Info
Check Primary
DNS Server
Setting
#125# None
IVR will announce the current setting
in the Primary DNS field.
Info
Check Firmware
Version
#128# None
IVR will announce the version of the
firmware running on the ATA.
Setting Set DHCP client #111# None
The system will change to DHCP
Client type
Setting
Set Static IP
Address
#112xxx*xxx*xxx*xxx#
Enter IP address using numbers on the
telephone keypad. Use the * (star) key
when entering a decimal point.
DHCP will be disabled and system will
change to the Static IP type.
Setting Set Network Mask #113xxx*xxx*xxx*xxx#
Enter value-using numbers on the
telephone keypad. Use the * (star) key
when entering a decimal point.
Must set Static IP first.
Setting
Set Gateway IP
Address
#114xxx*xxx*xxx*xxx#
Enter IP address using numbers on the
telephone keypad. Use the * (star) key
when entering a decimal point.
Must set Static IP first.
Setting
Set Primary DNS
Server
#115xxx*xxx*xxx*xxx#
Enter IP address using numbers on the
telephone keypad. Use the * (star) key
when entering a decimal point.
Must set Static IP first.
Setting Set Codec #130+[1-8]#
1:G.711 u-Law, 2: G.711 a-Law, 4:
G.729a, 5: G.726 16K, 6: G.726 24K, 7:
G.726 32K, 8: G.726 40K,
You can set the codec you want to the
first priority.
Setting Set Handset Gain #131+[00~15]# Handset Gain from 0~15
You can set the Handset gain to proper
value, default is 6
Setting
Set Handset
Volume
#132+[00~12]# Handset Volume from 0~12
You can set the Handset volume to
proper value, default is 10
Setting
Set Auto
Configuration
Mode
#137X#
Select the auto configuration mode, in the
X field, you can press the following;
0:OFF 1:TFTP 2:FTP
You can set the auto configuration
method you want, default is off
Setting
Set Auto
Configuration For
TFTP Server
#135xxx*xxx*xxx*xxx#
Enter IP address using numbers on the
telephone keypad. Use the * (star) key
when entering a decimal point.
Must set auto configuration method to
TFTP first
Setting
Set Auto
Configuration For
FTP Server
#136xxx*xxx*xxx*xxx#
Enter IP address using numbers on the
telephone keypad. Use the * (star) key
when entering a decimal point.
Must set auto configuration method to
FTP first