Welltech VoIP ATA series V.2.1 - Manual (Page 123)

ATA-171/172/171P/171M/171+/172+
User’s Guide
Step 1: On the main page, select [Others Advanced Settings], enter [Advanced Setting] page,
after setting CPS, click [Submit] (See Figure 3
)
(Figure 3)
Step 2: After saving change, enter [Note Information] page, “Note Information” will be seen, then the
changing will come into effect.
Step 3: On the main page, select [Save Change] item, enter [Save Changes] page, and execute the
saving command by click [Save]. [Note Information] page will be seen which means saving
successfully. And the system will be restarted, please wait for a while.
Step4: Generally speaking，if a human is using a phone line，it doesn't matter whether the phone
equipment recognizes CPC or not，since the human will physically hang-up the phone when
they're done with the call，or they'll pick the call up off of hold when the phone system rings
back after X seconds / minutes.
Example3: Send Flash Event
 Send Flash Event: DTMF Event
Step 1: On the main page, select [Others Advanced Settings], enter [Advanced Setting] page,
after revising the information, (e.g.: Send Flash event: DTMF Event), click [Submit] (See
Figure 4
)