Welltech VoIP ATA series V.2.1 - Manual (Page 53)

ATA-171/172/171P/171M/171+/172+
User’s Guide
5.13.3 Operate Instruction
Example 1: Register Account or Input Hot Line Number.
Step 1: On the main page, select [Phone Setting
 HotLine Setting], enter [HotLine Setting]
page, after revising information (e.g. User Hot Line: Enable, Hot Line number: 22062) (See
Figure 1), then click [Submit].
(Figure 1)
Step 2: After saving change, enter [Note Information] page, “Note Information” will be seen,
then the changing will come into effect.
Step 3: On the main page, select [Save Change] item, enter [Save Changes] page, and execute
the saving command by click [Save]. [Note Information] page will be seen which means
saving successfully. And the system will be restarted, please wait for a while.
Step 4: After restarted the system and pick up the phone, it will dial to [22062]
automatically.
Example 2: Dial to another IP Address directly.
Step 1: On the main page, select [Phone Setting  Hotline Setting], enter [Hotline Setting] page,
after revising information (e.g. User Hot Line: Enable, Hot Line number: 22062) (See Figure
2), then click [Submit].
(Figure 2)
Step 2: After saving change, enter [Note Information] page, “Note Information” will be seen,
then the changing will come into effect.
Step 3: On the main page, select [Save Change] item, enter [Save Changes] page, and execute
the saving command by click [Save]. [Note Information] page will be seen which means
saving successfully. And the system will be restarted, please wait for a while.
Step 4: After restarted the system and pick up the phone, it will dial to IP Address
[192.168.1.206] automatically.