Welltech VoIP ATA series V.2.1 User Manual
Page 119
ATA-171/172/171P/171M/171+/172+
User’s Guide
Off Time 1
Default: 20; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
On
Time
2
Default: 3; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Off Time 2
Default: 400; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
On
Time
3
Default: 0; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Off
Time
3
Default: 0; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Submit [Button]
Submit the change.
Reset [Button]
Clear the change.
9.4.3 Operate Instruction
Step 1: On the main page, select [Others
Tones Settings], enter [Tones Settings] page, after
revising the information, click [Submit]
(See Figure 1).
(Figure 1)
Step 2: After saving change, enter [Note Information] page, “Note Information” will be seen, then the
changing will come into effect.
Step 3: On the main page, select [Save Change] item, enter [Save Changes] page, and execute the
saving command by click [Save]. [Note Information] page will be seen which means saving
successfully. And the system will be restarted, please wait for a while
Step 4: Call to another equipment, the frequency of Ring Back Tone changes.