Welltech VoIP ATA series V.2.1 - Manual (Page 43)

ATA-171/172/171P/171M/171+/172+
User’s Guide
3009, 12; Drop prefixNo, Replace rule 4007, 5xxx+35xx+21xx; Dial
Now*xx+#xx+11x +xxxxxxxx) (See Figure 1), then press [Submit].
(Figure 1)
Step 2: After saving change, enter [Note Information] page, “Note Information” will be seen,
then the changing will come into effect.
Step 3: On the main page, select [Save Change] item, enter [Save Changes] page, and execute
the saving command by press [Save]. [Note Information] page will be seen which means
saving successfully. And the system will be restarted, please wait for a while.
Instruction 1:
Drop prefixNo, Replace rule 1002, 8613+8662.
Application 1: When dialing 8613, all numbers that begin with 8613, will be added
with 002, so actually the dialing number is [002+8613+xxx].
Application 2: When dialing 8662, all numbers that begin with 8662, will be added
with 002, so actually the dialing number is [002+8662+xxx].
Instruction 2:
Drop prefixYes, Replace rule 2006, 002+003+004+005+007+009.
Application 1: When input 002 and all numbers that begin with 002 will be replaced
by 006; so actually the dialing number is [006+xxx]
Application 2: When input 003 and all numbers that begin with 003 will be replaced
by 006; so actually the dialing number is [006+xxx].
Instruction 3:
Drop prefixNo, Replace rule 3009, 12.
Application 1: When input 12, and all numbers that begin with 12, will be added with
009; so actually the dialing number is [009+12+xxx].
Instruction 4:
Drop prefixNo, Replace rule 4007, 5xxx+35xx+21xx.
Application 1: When input 5xxx, all 4 digits numbers that begin with 5, will be added
with 007; so actually the dialing number is [007+5xxx].
Application 2: When input 534, all 3 digits numbers that begin with 5, doesn’t match
the encode rule, so actually the dial out number is [534]
Application 3: When input 35xxx, all 5 digits numbers that begin with 35, will be
added with 007; so actually the dialing number is [007+5xxx].