Welltech VoIP ATA series V.2.1 - Manual (Page 59)

ATA-171/172/171P/171M/171+/172+
User’s Guide
PPPoE Setting Provides PPPoE Setting.
User Name Provides user’s name of PPPoE Server, can be numbers or
strings. Length: 63 bytes.
Password Provides password of PPPoE Server, can be numbers or strings.
Length: 63 bytes.
Service Name
. Maximum length is 63 bytes.
Submit [Button] Submit the change.
Reset [Button] Clear the change.
6.2.3 Operate Instruction
Example: Check Host Name
Step 1: On the main page, select [Network Setting WAN Setting], enter [WAN Settings] page, after
revising information (e.g. IP Type: DHCP Client) (See Figure 1), then click [Submit].
(Figure 1)
Step 2: After saving change, enter [Note Information] page, “Note Information” will be seen,
then the changing will come into effect.
Step 3: On the main page, select [Save Change] item, enter [Save Changes] page, and execute
the saving command by click [Save]. [Note Information] page will be seen which means
saving successfully. And the system will be restarted, please wait for a while.
Step 4: To view [Host Name] by Ethereal. Please refer [Option 12Host Name= “VOIP
Phone”] as follows (See Figure 2)