Welltech VoIP ATA series V.2.1 User Manual
Page 61
ATA-171/172/171P/171M/171+/172+
User’s Guide
6.3.1 LAN Settings
6.3.1 Function
LAN Settings provide LAN setting, including DHCP Server function.
6.3.2 Instruction
Figure LAN
Setting
LAN Setting
Provides LAN Setting.
IP Default:
192.168.123.1.
Format: xxx.xxx.xxx.xxx. Maximum
length is 15 bytes.
Mask
Default: 255.255.255.0 provides Subnet Mask IP Address.
Format: xxx.xxx.xxx.xxx. Maximum length is 15 bytes.
MAC
Show MAD ID information. Maximum length is 12 bytes.
DHCP Server
Provides DHCP Server information.
DHCP
Server
Default: OFF. When setting ON, DHCP Server will run
automatically.
Start IP
Default: 150, to set Start IP information. From (1~254).
Maximum length is 3 bytes.
End IP
Default: 200, to set End IP information. From (1~254).
Maximum length is 3 bytes.
Lease Time
Default: 1:0 (dd: hh), to set lease time for dispatching IP
information. From (00:00~99:23). Maximum length is 2 bytes.
Submit [Button]
Submit the change.
Reset [Button]
Clear the change.
6.3.3 Operate Instruction
Step 1: On the main page, select [Network Setting
LAN Setting], enter [LAN Settings] page, after
revising information (e.g. IP: 192.168.200.1, Start IP: 50, End IP: 100, Lease Time: 00:05)
(See Figure 1), then click [Submit].