Welltech VoIP ATA series V.2.1 User Manual
Page 58
ATA-171/172/171P/171M/171+/172+
User’s Guide
6.2.1 WAN Settings
6.2.1 Function
WAN Settings provide WAN Setting.
6.2.2 Instruction
Figure WAN
Setting
LAN Mode
Default: NAT. NAT is different from WAN; LAN will dispatch IP to
DHCP Server automatically. When Bridge is on, WAN & LAN can
be at the same subnet.
WAN Setting
Provide the WAN setting
IP Type
Default: DHCP Client, provides Fixed IP, gains IP Address
automatically. PPPoE: ADSL Dialing number.
IP
Default: current IP Address; or any IP Address that is
xxx.xxx.xxx.xxx. If would like to change IP Address, please set
IP Type as “Fixed IP”. . Maximum length is 15 bytes.
Mask
Default: current Subnet Mask IP Address. Format:
xxx.xxx.xxx.xxx. Or change Sunbet Mask IP. Maximum length is
15 bytes.
Gateway
Default: current gateway IP address; or change Gateway IP. .
Maximum length is 15 bytes.
DNS Server1
Default: 168.95.192.1. Can input IP or Domain Name, format:
xxx.xxx.xxx.xxx. If would like to gain DHCP or PPPoE Server
automatically, please fill this blank as “0.0.0.0”. Maximum
length is 15 bytes.
DNS Server2
Default: 168.95.1.1. Can input IP or Domain Name, format:
xxx.xxx.xxx.xxx. If would like to gain DHCP or PPPoE Server
automatically, please fill this blank as “0.0.0.0”. . Maximum
length is 15 bytes.
MAC
Show MAC ID Address. . Maximum length is 12 bytes.
Host Name
Default: product name. Numbers or strings are both acceptable.
Length: 15 bytes.