Welltech VoIP ATA series V.2.1 - Manual (Page 19)

ATA-171/172/171P/171M/171+/172+
User’s Guide
Reset [Button] Delete selected information.
Figure 2: FXS and FXO or Phone and FXO equipment
All forward Default: Off. When setting ON, all the incoming calls will be
forwarded by IP mode or PSTN mode.
NOTICE: If the incoming call goes through FXO, the call
could only be forwarded to IP mode.
Busy Forward Default: Off. When setting On, and the line is busy, the call will
be forwarded only by IP mode.
No Answer
Forward Default: Off. When setting On, and nobody answers the phone, it
will run by IP mode or PSTN mode.
NOTICE: If the incoming call goes through FXO, the call
could only be forwarded to IP mode.
All Fwd No. All incoming calls will be forwarded.
Name Show or input the name.
URL Number Show or input the dialing information, can be Login Account, IP
Address or PSTN Numbers, maximum length is 63 bytes.
Busy Fwd No. Forward the call when line is busy.
Name Show or set the name.
URL Number Show or input the dialing information, can be Login Account, IP
Address or PSTN Numbers, maximum length is 63 bytes.
No Answer Fwd
No. Forward the call when nobody answers the phone.
Name Show or set the name.
URL Number Show or input the dialing information, can be Login Account, IP
Address or PSTN Numbers, maximum length is 63 bytes.
No Answer Fwd
Time Out
Default: 3(Ring), when ringing 3 times but no one answers, it is
regarded as no one answers the call. Data Range: (2~8 Ring) . .
Maximum length is 2 bytes.
Submit [Button] Enforce the command of saving chance.
Reset [Button] Delete selected information.
5.1.3 Operate Instruction
Example 1: Forwarded under any condition