Welltech VoIP ATA series V.2.1 - Manual (Page 50)

ATA-171/172/171P/171M/171+/172+
User’s Guide
5.12.1 T.38 (FXS) Setting (T.38 Fax)
5.12.1 Function
T.38 Setting provides the setting related to fax T.38 SIP Proxy server Or Trunk is
required to have those function.
5.12.2 Instruction
Figure 1: FXS /FXS+FXO equipment
(Figure 1)
T.38 (FAX) Default ON. When setting OFF, T. 38 will be closed.
T.38 Port Default 60000. To set the location of T.38. Data range: (1024~
65535) . Maximum length is 5 bytes.
Submit [Button] Submit the change.
Reset [Button] Clear the change.
Figure T.38 (FXS) Setting (2FXS VoIP Gateway Only)
T.38 (FAX) Default: ON. When setting OFF, T. 38 will be closed.
T.38 Port of
Phone 1 Default 60000. To set the location of T.38. Data range: (1024~
65535)
Support one port executes fax function. . Maximum
length is 5 bytes.
T.38 Port of
Phone 2 Default 60100. To set the location of T.38. Data range: (1024~
65535)
Support one port executes fax function. Maximum
length is 5 bytes.
Submit [Button] Submit the change.
Reset [Button] Clear the change.
5.12.3 Operate Instruction
Step 1: On the main page, select [Phone Setting T.38 Setting], enter [T.38 Setting] page, after
revising information (e.g. T.38 Port of Phone1: 60100, T.38 Port of Phone 2: 60000) (See
Figure 1), then click [Submit].