Welltech VoIP ATA series V.2.1 - Manual (Page 15)

ATA-171/172/171P/171M/171+/172+
User’s Guide
4.2.1 Speed Dial (for Phone)
4.2.1 Function
Speed Dial Phone List can provide 10 entries in total and must be used with Function
Key.
4.2.2 Instruction
Figure Speed Dial Setting
【
1】
There must be corresponding M1 to M10 quick dial function button on the phone
set; otherwise, the quick dial function will be uneffective.
Phone Show the serial number. 10 entries in total.
Name Show the user’s name.
URL Show the URL information.
Select Select the information.
Delete Selected
[Button] Delete all selected information.
Delete All
[Button] Delete all information.
Reset [Button] Reset selected information.
Add New Phone Add new speed dial phone book information.
Phone Input serial number, from(0~9) . . Maximum length is 1 bytes.
Name Input the code, numbers or names; maximum length is 31
bytes.
URL Input Line Number or IP information; maximum length is 63
bytes.
Add Phone
[Button] Add this new entry.
Reset [Button] Reset selected information.