Welltech VoIP ATA series V.2.1 - Manual (Page 34)

ATA-171/172/171P/171M/171+/172+
User’s Guide
5.7.1 Auto Answer (For FXO)
5.7.1 Function
Auto Answer provides auto answer and switches to FXO or FXS.
5.7.2 Instruction
Figure Auto Answer Setting
Auto Answer Default OFF. When setting ON, auto answer will come into run.
Auto Answer
Counter Default 3 rd Ring, when ringing after 3 times, auto answer will
run. Counter zone (3~8) . . Maximum length is 2 bytes.
PIN Code Enabled Default OFF. When setting ON, the right password is needed, and
please presses”#” after the password.
PIN Code The password. Maximum length is 31 bytes.
Submit [Button] Submit the change.
Reset [Button] Clear the change.
5.7.3 Operate Instruction
Example 1: Start the Auto Answer Function
Step 1
: On the main page, select [Phone SettingAuto Answer], enter [Auto Answer] page,
after revising information (e.g. Auto Answer: on, Auto Answer Counter: 1) (See Figure 1),
then click [Submit].
(Figure 1)
Step 2: After saving change, enter [Note Information] page, “Note Information” will be seen,
then the changing will come into effect.
Step 3: On the main page, select [Save Change] item, enter [Save Changes] page, and execute