Welltech VoIP ATA series V.2.1 - Manual (Page 122)

ATA-171/172/171P/171M/171+/172+
User’s Guide
9.5.3 Operate Instruction
Example1: Send Anonymous CID
Step 1: On the main page, select [Others Advanced Settings], enter [Advanced Setting] page,
after start it, click [Submit] (See
Figure 1).
(Figure 1)
Step 2: After saving change, enter [Note Information] page, “Note Information” will be seen, then the
changing will come into effect.
Step 3: On the main page, select [Save Change] item, enter [Save Changes] page, and execute the
saving command by click [Save]. [Note Information] page will be seen which means saving
successfully. And the system will be restarted, please wait for a while
Step 4: After rebooting, and call to another equipment, dial out CID cannot be found.
Please check [Ethereal] Packet and column [From: “Anonymous”
[email protected] >]
(See Figure 2)
(Figure 2)
Example2: CPC