Welltech VoIP ATA series V.2.1 - Manual (Page 108)

ATA-171/172/171P/171M/171+/172+
User’s Guide
(Figure 3)
Step 2: After saving change, enter [Note Information] page, “Note Information” will be seen, then the
changing will come into effect.
Step 3: On the main page, select [Save Change] item, enter [Save Changes] page, and execute the
saving command by click [Save]. [Note Information] page will be seen which means saving
successfully. And the system will be restarted, please wait for a while
Step 4:
After rebooting, it will connect to the file in FTP Server, and searching the fit
information. After renew all information, the system will be rebooting again. Then
please login to check it (See Figure 4)
(Figure 4)
9.1.4 Build Auto Configuration file
Example1: Build one entry encode formation
Step 1
: Open file [MACList.txt], input [MAC Address，Display Name，User Name，Register Name，
Register Pass] one by one. (E.g.: 00059e812118，UN_DO，105，105，105), then save (See
Figure 1)