Welltech VoIP ATA series V.2.1 User Manual
Page 118
ATA-171/172/171P/171M/171+/172+
User’s Guide
Hi-Tone Gain
Default: 2261 ； Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Lo-Tone Gain
Default: 2261 ； Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
On Time 1
Default: 30; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Off Time 1
Default: 20; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
On
Time
2
Default: 0; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Off
Time
2
Default: 0; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
On
Time
3
Default: 0; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Off
Time
3
Default: 0; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Ring Tone
Setting the Ring Tone information.
Cadence On
Default: Enable.
Hi-Tone Freq
Default: 480 ； Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Lo-Tone Freq
Default: 440 ； Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Hi-Tone Gain
Default: 15360；Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Lo-Tone Gain
Default: 15360；Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
On Time 1
Default: 200; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Off Time 1
Default: 400; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes..
On
Time
2
Default: 0; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Off
Time
2
Default: 0; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes..
On
Time
3
Default: 0; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Off
Time
3
Default: 0; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Call Waiting Tone Setting the Call Waiting Tone information.
Cadence On
Default: Enable.
Hi-Tone Freq
Default: 440 ； Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Lo-Tone Freq
Default: 350 ； Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Hi-Tone Gain
Default: 2261 ； Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
Lo-Tone Gain
Default: 1130 ； Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.
On Time 1
Default: 30; Only numerals are acceptable. Data range:
(0~99999). Maximum length: 5 bytes.