Verilink SCM (880-503300-001) Product Manual User Manual

Page 75

Downloading and Broadcasting Firmware

Verilink SCM

6-11

The SCM Controller Administration Menu displays. Select
command option: B) download firmware

[0.0.0.0] [1,1] SCM > b

Figure 6-6

Download Firmware Menu

Select

to broadcast the download image file:

[0.0.0.0] [1,1] SCM > n

Figure 6-7

SCM Download Broadcast Prompt

After you press E

NTER

, the broadcast process takes place as in the

following example. The interface dynamically indicates the current
percentage of the download that has completed. It polls all the
modules in the node for potential anomalies during the download:

Figure 6-8

Download Anomalies

Press E

NTER

to continue.

-- SCM DOWNLOAD FIRMWARE MENU --

N) ACP broadcast download C) card re-transmit

N) ACP broadcast download C) card re-transmit
B) ACP broadcast switchover O) switchover to bank A/B

B) ACP broadcast switchover O) switchover to bank A/B

B) ACP broadcast switchover O) switchover to bank A/B
S) ACP broadcast results T) TABS download

S) ACP broadcast results T) TABS download

X) exit this menu

A [0.0.0.2] [1,1] SCM >

broadcast begin

broadcast begin
broadcast_sector: equip id = 0x1

broadcast_sector: equip id = 0x1

broadcast_sector: equip id = 0x1
file size = 630875

file size = 630875

file size = 630875
Press enter to continue

Press enter to continue

shelf 1 / slot 6 is being polled

00000006:1.A 5% complete

shelf 1 / slot 6 is being polled

...

00000006:1.A 95% complete

shelf 1 / slot 6 is being polled

00000006:1.A 100% complete

shelf 1 / slot 6 is being polled

file checksum = 57398768

broadcast done

[12.13.14.15] [1,1] SCM >