Verilink SCM (880-503300-001) Product Manual - Manual (Page 37)

Craft Interface
Verilink SCM 3-15
Manufacturing
Info
This submenu displays hardware revision level, date of
manufacture, serial number and part number information for the
currently selected module. The front application module appears
under the heading "Main Card" and the Connector Interface Module
in the rear is reported under the “CIM” column.
This information may be very useful if you need to contact Verilink
for assistance.
This screen is read-only to users of the equipment. The information
is set in the card at time of manufacture and updated as need be
when a card is factory upgraded.
NOTE: This information is not available for the IMUX modules in the
shelf.
Figure 3-10 shows a sample of Manufacturing Information Report.
Figure 3-10 Manufacturing Information Report
Pressing E NTER returns you to the Main Menu.
Module-Specific
Menus
When the SCM is used to select certain application modules, new
commands and functions display specific to those modules:
• When managing an M1-3 module the prompt F) Display Far
End DS3 Port Identification appears . This optional
informational display provides a place to enter descriptions of
the facilities related to the port.
• The QUAD T1 and M1-3 modules present R) Remote End Setup
which enables configuration of certain far-end parameters
before inband management is enabled. Before leaving this
screen the Update SCM Table option should be used if any
changes have been made. The parameters which can be
changed in the far-end product are:
• Node address
-- MANUFACTURING INFORMATION -- -- MANUFACTURING INFORMATION -- -- MANUFACTURING INFORMATION -- -- MANUFACTURING INFORMATION --
Main Card CIM Main Card CIM Main Card CIM Main Card CIM
revision RM) A RC) A
revision RM) A RC) A revision RM) A RC) A revision RM) A RC) A
date DM) 11/8/98 DC) 11/8/98
date DM) 11/8/98 DC) 11/8/98 date DM) 11/8/98 DC) 11/8/98 date DM) 11/8/98 DC) 11/8/98
serial number SM) 00622014 SC) 00643461
serial number SM) 00622014 SC) 00643461 serial number SM) 00622014 SC) 00643461 serial number SM) 00622014 SC) 00643461
manuf. part no. MM) 319101697001 MC) 311101761001
manuf. part no. MM) 319101697001 MC) 311101761001 manuf. part no. MM) 319101697001 MC) 311101761001 manuf. part no. MM) 319101697001 MC) 311101761001
cage code CM) CC)
cage code CM) CC) cage code CM) CC) cage code CM) CC)
type TM) SCM TC) NIM 3000
type TM) SCM TC) NIM 3000 type TM) SCM TC) NIM 3000 type TM) SCM TC) NIM 3000
Press Enter to continue Press Enter to continue Press Enter to continue Press Enter to continue