Changing name clones new circuit, Changing name clones new circuit -8 – Verilink SCM (880-503300-001) Product Manual User Manual

Page 62

Circuit Manager

5-8

Verilink SCM

Figure 5-4 Edit Circuit Menu

The options in the Edit Circuit Menu are described in

Table 5-3

Changing Name

Clones New

Circuit

When a circuit name is modified, it is the same as adding a new
unique circuit having the same configuration as the originally
named circuit. This is the point at which a new circuit is cloned.
The original circuit is not disturbed. This is handy when creating
multiple circuits with similar characteristics.

The editing process is exactly like initially configuring a circuit.
You may change the name of a circuit by typing the command
option N from the Edit Circuit Menu for the circuit selected for
editing.

[127.127.127.67] [0,1] SCM > n

A prompt appears:

Enter circuit name ( 12 char maximum ) > m2

The name of the selected circuit is changed in the redisplayed
menu.

Select DP) QUAD dat2 and the screen in

Figure 5-5

appears.

Figure 5-5 Edit Circuit Menu

-- EDIT CIRCUIT MENU [0,1] SCM Firmware 1.20b --

N) name: m1 M) mode: 64k

SP) src port: [0,12] QUAD net1 DP) dst port: [0,10] QUAD dat1

SP) src port: [0,12] QUAD net1 DP) dst port: [0,10] QUAD dat1
SM) -- DS0 map selection -- -- port data rate --

SM) -- DS0 map selection -- -- port data rate --

SM) -- DS0 map selection -- -- port data rate --
01 02 03 04 05 06 07 08

01 02 03 04 05 06 07 08

01 02 03 04 05 06 07 08
.. .. .. .. .. .. .. .. [ 64k * 8 = 512 kbps ]

.. .. .. .. .. .. .. .. [ 64k * 8 = 512 kbps ]

.. .. .. .. .. .. .. .. [ 64k * 8 = 512 kbps ]
.. .. .. .. .. .. .. ..

.. .. .. .. .. .. .. ..

bus: AUT ->-->>->> Running on Bus A.1 <<-<<--<-

-- EDIT CIRCUIT MENU [0,1] SCM Firmware 1.20b --

N) name: m2 M) mode: 64k

SP) src port: [0,12] QUAD net2 DP) dst port: [0,10] QUAD dat2

SP) src port: [0,12] QUAD net2 DP) dst port: [0,10] QUAD dat2
SM) -- DS0 map selection -- -- port data rate --