Verilink SCM (880-503300-001) Product Manual - Manual (Page 40)

Administration Menu
4-2 Verilink SCM
Figure 4-1 Administration Menu
SCM CONTROLLER ADMINISTRATION MENU -- SCM CONTROLLER ADMINISTRATION MENU -- SCM CONTROLLER ADMINISTRATION MENU -- SCM CONTROLLER ADMINISTRATION MENU --
Date/Time/Zone: 11-13-98 21:25:20 PST Date/Time/Zone: 11-13-98 21:25:20 PST Date/Time/Zone: 11-13-98 21:25:20 PST Date/Time/Zone: 11-13-98 21:25:20 PST
Node address: [0.0.0.2]
Node address: [0.0.0.2] Node address: [0.0.0.2] Node address: [0.0.0.2]
Node id: 122
Node id: 122 Node id: 122 Node id: 122
Site name: SCM Tutorial
Site name: SCM Tutorial Site name: SCM Tutorial Site name: SCM Tutorial
System uptime: 18:10:19
System uptime: 18:10:19 System uptime: 18:10:19 System uptime: 18:10:19
--- NODE ADMINISTRATION --- --- NODE ADMINISTRATION --- --- NODE ADMINISTRATION --- --- NODE ADMINISTRATION ---
H) set shelf type Z) set time zone H) set shelf type Z) set time zone H) set shelf type Z) set time zone H) set shelf type Z) set time zone
T) set time D) set date
T) set time D) set date T) set time D) set date T) set time D) set date
B) download firmware Y) switch over once
B) download firmware Y) switch over once B) download firmware Y) switch over once B) download firmware Y) switch over once
W) write file to flash O) switch over permanent
W) write file to flash O) switch over permanent W) write file to flash O) switch over permanent W) write file to flash O) switch over permanent
C) set front/rear access Q) query firmware
C) set front/rear access Q) query firmware C) set front/rear access Q) query firmware C) set front/rear access Q) query firmware
A) set node address R) reset card
A) set node address R) reset card A) set node address R) reset card A) set node address R) reset card
I) change site name E) change node id
I) change site name E) change node id I) change site name E) change node id I) change site name E) change node id
N) TCP/IP parameters P) change password
N) TCP/IP parameters P) change password N) TCP/IP parameters P) change password N) TCP/IP parameters P) change password
M) modem parameters S) node selection
M) modem parameters S) node selection M) modem parameters S) node selection M) modem parameters S) node selection
K) show shelf sync_master F) partition copy (B => A)
K) show shelf sync_master F) partition copy (B => A) K) show shelf sync_master F) partition copy (B => A) K) show shelf sync_master F) partition copy (B => A)
X) exit this menu
X) exit this menu X) exit this menu X) exit this menu
A [0.0.0.2] [1,1] SCM >
A [0.0.0.2] [1,1] SCM > A [0.0.0.2] [1,1] SCM > A [0.0.0.2] [1,1] SCM >