Verilink SCM (880-503300-001) Product Manual - Manual (Page 32)

Craft Interface
3-10 Verilink SCM
Figure 3-5 QUAD DATA Configuration Menu
Diagnostics Diagnostics are not required for the SCM itself. Since it does not
handle user data, the SCM controls diagnostics on other modules
that do handle user data.
To perform diagnostics on a module, go to the Main Menu, select a
module by using the S) shelf/slot command, then select D)
diagnostics.
An example of an IMUX module Diagnostics Menu is shown in
Figure 3-6 .
-- QUAD DATA CONFIGURATION MENU -- -- QUAD DATA CONFIGURATION MENU -- -- QUAD DATA CONFIGURATION MENU -- -- QUAD DATA CONFIGURATION MENU --
Port 1 Port 2 Port 3 Port 4 Port 1 Port 2 Port 3 Port 4 Port 1 Port 2 Port 3 Port 4 Port 1 Port 2 Port 3 Port 4
In) in service yes yes yes yes In) in service yes yes yes yes In) in service yes yes yes yes In) in service yes yes yes yes
Fn) interface type EIA-530 RS-449 RS-449 V.35
Fn) interface type EIA-530 RS-449 RS-449 V.35 Fn) interface type EIA-530 RS-449 RS-449 V.35 Fn) interface type EIA-530 RS-449 RS-449 V.35
Mn) data port mode DCE DTE DTE DCE
Mn) data port mode DCE DTE DTE DCE Mn) data port mode DCE DTE DTE DCE Mn) data port mode DCE DTE DTE DCE
Cn) clock option ST --- --- ST
Cn) clock option ST --- --- ST Cn) clock option ST --- --- ST Cn) clock option ST --- --- ST
On) enable LOS detect no no no no
On) enable LOS detect no no no no On) enable LOS detect no no no no On) enable LOS detect no no no no
An) remote loopback no no no no
An) remote loopback no no no no An) remote loopback no no no no An) remote loopback no no no no
Ln) X.21 C/I setting --- --- --- ---
Ln) X.21 C/I setting --- --- --- --- Ln) X.21 C/I setting --- --- --- --- Ln) X.21 C/I setting --- --- --- ---
SRn) DTR/DSR setting DSR/normal DTR/normal DTR/normal DSR/normal
SRn) DTR/DSR setting DSR/normal DTR/normal DTR/normal DSR/normal SRn) DTR/DSR setting DSR/normal DTR/normal DTR/normal DSR/normal SRn) DTR/DSR setting DSR/normal DTR/normal DTR/normal DSR/normal
SSn) RTS/CTS setting CTS/normal RTS/normal RTS/normal CTS/normal
SSn) RTS/CTS setting CTS/normal RTS/normal RTS/normal CTS/normal SSn) RTS/CTS setting CTS/normal RTS/normal RTS/normal CTS/normal SSn) RTS/CTS setting CTS/normal RTS/normal RTS/normal CTS/normal
SDn) DCD/LL setting DCD/normal LL /off LL /off DCD/normal
SDn) DCD/LL setting DCD/normal LL /off LL /off DCD/normal SDn) DCD/LL setting DCD/normal LL /off LL /off DCD/normal SDn) DCD/LL setting DCD/normal LL /off LL /off DCD/normal
SMn) TM/RL setting TM /off RL /off RL /off TM /off
SMn) TM/RL setting TM /off RL /off RL /off TM /off SMn) TM/RL setting TM /off RL /off RL /off TM /off SMn) TM/RL setting TM /off RL /off RL /off TM /off
C) copy port T) timing C) copy port T) timing C) copy port T) timing C) copy port T) timing
X) exit this menu X) exit this menu X) exit this menu X) exit this menu
A [0.0.0.2] [1,2] QUAD DATA > A [0.0.0.2] [1,2] QUAD DATA > A [0.0.0.2] [1,2] QUAD DATA > A [0.0.0.2] [1,2] QUAD DATA >