Verilink SCM (880-503300-001) Product Manual - Manual (Page 74)

Downloading and Broadcasting Firmware
6-10 Verilink SCM
Table 6-2 Download Firmware Menu Options Support
NOTE: BEFORE DOWNLOADING, turn off alarm reporting in the
individual application modules.
TABS Download
for the IMUX
The IMUX is the only TABS based application module in the AS3000
family of products. The download process for the IMUX requires
the use of the T) TABS download option in the SCM Download
Firmware Menu. The messages for the TABS download differ
slightly from the ACP Broadcast messages.
The major difference is that the TABS download allows only
broadcast downloads, not targeted downloads. All IMUX modules in
the shelf are upgraded if one is upgraded. The process takes about
20 minutes per module.
Broadcast
Results
If the ACP Broadcast Results option is used before a broadcast has
been done, the information shown will apply only to the status of
code in the SCM module(s).
During a download, ACP Broadcast Results cannot be used. Wait
for the download to finish.
The ACP Broadcast Results option shows the results of ACP
broadcast downloads only. If a specific shelf/slot has been
targeted by use of the Card Retransmit function, those results are
not shown in the broadcast result screen.
Securing the
Download File
You must have already transferred the file to the RAM of the SCM
that is going to broadcast to the node. Follow the directions to
“Verify FTP Server Access” on page 6-6 and “Using FTP to Transfer
the File” on page 6-7 before proceeding.
Next, from the SCM Main Menu select Administration:
[0.0.0.2] [1,1] SCM > o
SCM Download Options M1-3 QUAD DATA QUAD T1 IMUX
N) ACP broadcast download supported supported supported
B) ACP broadcast switchover supported supported supported
S) ACP broadcast results supported supported supported
C) card re-transmit supported
O) switchover to bank A/B supported supported supported
T) TABS download supported