Verilink SCM (880-503300-001) Product Manual - Manual (Page 27)

Craft Interface
Verilink SCM 3-5
The Main Menu
The SCM Main Menu, shown in Figure 3-2 , provides:
• node information
• a display showing shelf type and module locations in the shelf
• a legend decoding the alphabetic characters for the modules in
the slots
• a command menu
• firmware revision number
Menu Heading The menu heading area provides system-level information for the
node.
Firmware Version The firmware version release level appears on the top line. The SCM
has a revision number series distinct from that of individual
application modules.
NOTE: The version levels shown in screen samples are placeholders
only and do not reflect the version level(s) as they may
appear in your system. Firmware revision levels vary
according to several factors, including special firmware
generated for specific customers, as well as more generic
versions.
Site Name The site name is entered in the SCM Administration Menu.
Node Address The node address is a unique Verilink address for each master SCM
in the network. Set it using the SCM Administration Menu. It has a
structure similar to an IP address.
Access Level The Access Level 2 shown in Figure 3-2 indicates the current user is
at the Privileged level. The four password levels are further
described in Chapter 4,
“Using Passwords” .
Node ID The node ID is used by Verilink’s Node Manager to identify each
node in the network. Set it using the SCM Administration Menu.