Alarms, Alarms -12 – Verilink SCM (880-503300-001) Product Manual User Manual

Page 34

Craft Interface

3-12

Verilink SCM

Figure 3-7 Example of IMUX 2160 Performance/Status Menu

Alarms

A primary function of the SCM is handling alarm messages from the
application modules. Alarms will be sent to an SNMP manager or
Verilink’s Node Manager if the TCP/IP options under the Network
Configuration submenu of the Administration Menu are properly
configured. See

“TheTCP/IP Configuration Menu”

in Chapter 3.

The SCM also displays alarm messages in real time to the Craft
interface. The Alarm command displays the Alarm Options Menu
for the currently selected module. If the SCM is selected, the
following menu displays:

Figure 3-8 Alarm Options Menu

-- IMUX PERFORMANCE/STATUS MENU --

Data Port Type: V.35

Data Port Type: V.35
AIS Pattern: DISABLE

AIS Pattern: DISABLE

AIS Pattern: DISABLE
Loopback: NONE

Loopback: NONE

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8
Lines Equipped: X X X X

Lines Equipped: X X X X

Lines Equipped: X X X X
Lines Active:

Lines Active:

Lines Active:
Frame Sync:

Frame Sync:

Frame Sync:
CTS Received:

CTS Received:

CTS Received:
CRC Error:

CRC Error:

CRC Error:
Far CRC Error:

Far CRC Error:

Press enter to continue

-- SCM ALARM MENU --

-- SCM ALARM MENU --
-- Alarm Conditions --

-- Alarm Conditions --

<- SLOT ->

<- SLOT ->
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13

SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13

SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
0 - - - - - - - - - - - - -

0 - - - - - - - - - - - - -

0 - - - - - - - - - - - - -
1 M C C C C C A A - - - - - -

1 M C C C C C A A - - - - - -

1 M C C C C C A A - - - - - -
2 - - - - - - - - - - - - -

2 - - - - - - - - - - - - -

2 - - - - - - - - - - - - -
3 - - - - - - - - - - - - -

3 - - - - - - - - - - - - -

3 - - - - - - - - - - - - -
4 - - - - - - - - - - - - -

4 - - - - - - - - - - - - -

4 - - - - - - - - - - - - -
Legend: A = in alarm, B = alarming blocked, C = alarms clear

Legend: A = in alarm, B = alarming blocked, C = alarms clear

M) alarm monitoring: no

M) alarm monitoring: no
I) relay inhibit

I) relay inhibit

I) relay inhibit
A) display alarm buffer

A) display alarm buffer

A) display alarm buffer
C) clear alarm buffer

C) clear alarm buffer

C) clear alarm buffer
X) exit this menu

X) exit this menu

A [0.0.0.2] [1,1] SCM >