MultiDyne ACI-2058 - Manual (Page 66)

W EB X v2.50 User Manual Chapter 3: Setting Up and Accessing the Switch
A54-3000-100 A 27 A PCON , Inc.
You are prompted to accept the certificate. W EB X enables SSH, then displays the
Settings>Services>Certificates screen.
7. Uncheck the Enable Telnet checkbox, then click the Update button.
Note: This prevents both secure SSH and non-secure telnet from being simultaneously
available.
When users use telnet, it will be via a secure connection.
3.4.3. Running ASCII Command Scripts Over the LAN
Ethernet Interface
To Enable one or more users to issue ASCII commands or run ASCII-command scripts over
the network:
1. Ensure that an IP address is set up, as described in Setting the IP Address starting on
page 16.
2. Log in as described in Logging In on page 23.
Note
If authentication is enabled, you must log in with Administrator permission privileges.
For details about permissions, see
Permissions on page 112.