Specifications, Blades, Table 1. specifications – MultiDyne ACI-2058 User Manual
Page 10: Specifications 2.3. blades
I
NTELLA
P
ATCH
Switches: ACI-2058 User Manual
A54-2058-000
6
A
PCON
, Inc.
2.2.
Specifications
2.3.
Blades
The ACI-2058’s modular design enables you to manage multiple protocols and data rates in a
single chassis. You can populate the switch with up toeighteendifferent blades, each blade
having from four to sixteen ports. In addition to one-to-one, one-to-many, and loop
connectivity, blades can provide the following capabilities:
•
Media conversion. Some blades use optical connectors while others use electrical.
Connect a port on a fiber optic blade to a port on a blade using copper connectors and,
dependent on the blade model, the ACI-2058 seamlessly converts signals from one
medium to the other, assuming that the optical and copper blades use the same protocol.
Optical signals can also be converted from multimode (shortwave) to single-mode
(longwave).
•
Repeater. Most blades for the ACI-2058 extract the clock from the signal, clean up jitter,
and then add the clock back to the signal.
•
Retimed signals. Certain blades for the ACI-2058 extract the clock from the signal,
clean up jitter, and then add a switch-generated clock back to the signal.
Table 1. Specifications
Item
Number
Description
ACI-2058-C00:
288-port chassis
Number of blade slots
Eighteen
Number of ports
Up to 288 (depending on blade type)
Protocol
Various; see
Blade data rate
10 Mbit to 10Gbit/sec
Serial interface
Baud Rate
9600 baud
Mode
No parity, 8 bits, 1 stop bit, software
flow control
Maximum cable length
15 meters (50 feet)
Rear panel connectors
DB-9
LAN port
Protocol
TCP/IP
Interface
10/100/1000 Base-T Ethernet
Rear panel connector
RJ-45
Physical
Mechanical
16.75" W x 15.00"D x 18.80"H
(42.5 cm W x 38.1 cm D x 47.8 cm H)
Weight
34 pounds (15.4 kg) without blades or
transceiver modules
Power
100 to 240 V AC 50 / 60 Hz (800 A)
Temperature Operating
Storage
0°C to 50°C (32°F to 123°F)
–40°C to 85°C (–40°F to 185°F)
Humidity
0% to 90% RH (noncondensing)
Rack mount
19 inches, 11U
Agency approvals
UL, FCC Class A, CE