MultiDyne ACI-2058 User Manual
Page 154
Chapter 10: Settings
A54-3000-100 A
115
A
PCON
, Inc.
Authorization Type:
Specifies the encryption method used for authorization. Values
include:
• MD5
• SHA
Password:
Specifies the SNMP auhorization passphrase.
Privacy Type:
Specifies the encryption method used for communication. Values
include:
• None
• AES
• DES
Password:
Specifies the SNMP privacy passphrase.
Retype Password:
Type the password again in this box for confirmation. The switch
ensures that the passwords match before accepting the password.
Permission:
Specifies the default permission, or access level, for new
user accounts:
• Guest: Users with this permission level have read-only access.
This is the lowest permission level.
• Operator: Users with this permission level can do all that Guest-
level users can do, plus patch ports using only preset
configurations.
• Advanced Operator: Users with this permission level can do all
that Operator-level users can do, plus patch ports on an ad-hoc
basis, change rates and port names, plus save configuration
settings (“presets”).
• Administrator: Users with this permission level do everything
that the other levels do, plus set switch, blade, port, and other
information as well as set and clear user and security
information. This is the highest permission level.
These options are available only if User Database is set to
Internal, RADIUS, or TACACS+.
user
password:
Specifies the password for the currently logged in user. Unless
the
(see page 107) is set to
None
, you must provide
a valid password.
This field is required only for changes to the SNMP user database.
Create button
Adds a user account to the SNMP user database.
Delete existing SNMPv3 user
Select user:
Lists all users in the SNMP user database. To select a user for
deletion, highlight that user, enter your password, then click the
Delete button. To select more than one user, press the Ctrl key as
you select users. To select a block of users, press the Shift key,
then select the first and last user in the block.
user
password:
Specifies the password for the currently logged in user. Unless
the
(see page 107) is set to
None
, you must provide
a valid password.
This field is required only for changes to the SNMP user database.
Delete button
Deletes selected users from the SNMP user database.
Field
Description