Event log, Figure 32. events screen – MultiDyne ACI-2058 User Manual
Page 121
Chapter 7: View
A54-3000-100 A
82
A
PCON
, Inc.
7.2.
Event Log
Displays the 500 most recent system events that occurred since the most recent boot. This
log mirrors the
, described on page 120.
To view system events, select:
View>Chassis>Event Log
This screen displays on the Canvas:
The screen includes these options:
Figure 32. Events screen
Refresh
interval
Note
To view this screen, your account needs only Guest permission privileges. For details about
permissions, see
Field
Description
Refresh interval
Specifies the amount of time that elapses before W
EB
X refreshes
the data. Valid values include
• No refresh (default): W
EB
X does not refresh the data.
• 10 seconds: Data automatically refreshes every ten seconds.
• 30 seconds: Data automatically refreshes every thirty seconds.
• 1 minute: Data automatically refreshes every minute.
• 5 minutes: Data automatically refreshes every five minutes.
Date/Time
Displays the date and time the event occurred.
Event
Lists the event type.
Blade
Displays the letter of the blade on which the event occurred. If 0
(zero) displays, a blade was not involved in the event.
Port
Displays the number of the port on which the event occurred. If 0
(zero) displays, no port was involved in the event.
Process
Lists the program that caused the event to occur.
User
Displays the login name of the user associated with the event.
Includes an IP address only if the User is at a different address
than the process.