MultiDyne ACI-2058 - Manual (Page 102)

W EB X v2.50 User Manual Chapter 6: Ports/Blades
A54-3000-100 A 63 A PCON , Inc.
6.4. Configuration
6.4.1. Names
Although port numbers are automatically designated, you can assign names to your ports,
names that indicate devices they connect to or to provide other meaningful aids to memory.
I NTELLA P ATCH blade labels use letters and start at the bottom. Port labels use numbers
prefaced by blade letter, and start at the left. For details, see Switch Labeling on page 9.
To name ports, select:
Ports/Blades>Configuration>Names
This screen displays on the Canvas:
The screen includes these options:
Figure 22. Names screen
Note
To make changes on this screen, your account must have a minimum of Advanced Operator
permission privileges. For details about permissions, see
Permissions on page 112.
Field Description
Blade:
(Tabs A, B, C...)
Clicking a tab displays port names for the specified blade.
Tab letters match the blade numbers on your I
NETELLA P ATCH
chassis. Blade labels use letters and start at the bottom. Port
labels use numbers prefaced by blade letter, and start at the left.
For details, see
Switch Labeling on page 9.
Port Number Identifies the port whose name you want to change:
• To assign a name, type the name in the text box to the right of
the port number, then click the Update button.
• To clear a name, delete the name in the text box to the right of
the port number, then click the Update button.