MultiDyne ACI-2058 - Manual (Page 133)

W EB X v2.50 User Manual Chapter 9: Maintenance
A54-3000-100 A 94 A PCON , Inc.
Field Description
XML (conforms to
apconswitch.dtd) Instructs the switch to export the specified data in XML format.
For information about this format, see
Import/Export File
Formats on page 147.
Note: If you plan to import this data to an I NTELLA P ATCH switch,
you must select this option. I NTELLA P ATCH switches accept
imported configuration data only in XML format.
Diagnostic XML Instructs the switch to export the specified data in Diagnostic XML
format. For information about this format, see
Import/Export File
Formats on page 147.
Diagnostic XML is the same as XML, but includes SFP digital
diagnostic information, such as SFP serial and model number, in
the export. You can use this additional information to take
inventory of the SFPs in your I
NTELLA P ATCH switch, and when
contacting A PCON Technical Support.
Notes:
• Because this format takes significantly longer to export on
large switches with a great number of SFPs, use regular XML
unless you specifically need the digital diagnostic information.
• The extra fields in the Diagnostic XML format do not affect the
import. You can import settings with either a regular XML file or
a Diagnostic XML file; the extra diagnostic fields are simply
ignored.
ASCII Commands Instructs the switch to export the specified data in plain text
(ASCII) format. For information about this format, see
Import/Export File Formats on page 147.
These commands can then be used directly in any custom scripts
that use the A
PCON Firmware Direct command set, also known as
ASCII.
A PCON C MD X / CLI2
Commands
Instructs the switch to export the specified data in A PCON C MD X
format. For information about this format, see Import/Export File
Formats on page 147.
Once exported to A PCON C MD X format, you can use the command
strings from within the telnet or SSH CLI or the A PCON C MD X
command line utility.
Note: Use the exported file as a template when developing your
own scripts. Running the exported file without scrutiny may alter
settings, such as network your IP address, that may cause your
connection to drop.
CLI3 Commands Instructs the switch to export the specified data in A PCON CLI3
format. For information about this format, see Import/Export File
Formats on page 147.
Once exported to A PCON CLI3 format, you can use the command
strings from within the telnet or SSH CLI or the A PCON CLI3
command line utility.
Note: Use the exported file as a template when developing your
own scripts. Running the exported file without scrutiny may alter
settings, such as network your IP address, that may cause your
connection to drop.