MultiDyne ACI-2058 - Manual (Page 42)

W EB X v2.50 User Manual Chapter 1: Preface
A54-3000-100 A 3 A PCON , Inc.
1.2.2. Text Conventions
This manual uses the following conventions:
>
Indicates the movement through menu options. For example, the
sequence for changing the switch name is:
View>Chassis>Controller Status
bold Indicates a directory or a file.
MonoText Indicates information that displays on the screen.
MonoBold Indicates information you type.
ItalicText Variable parameters.
1.3. Related Products
A PCON ’s W EB X is compatible with high-density (1") I NTELLA P ATCH switches such as these:
• I NTELLA P ATCH ACI-2065:A 1u 1 switch with one blade slot that supports up to 16 ports.
• I NTELLA P ATCH ACI-2069:A 2u switch with two blade slots that supports up to 32 ports.
• I NTELLA P ATCH ACI-2061: A 3u switch with four blade slots that supports up to 64 ports.
• I NTELLA P ATCH ACI-2064: A 6u switch with nine blade slots that supports up to 144 ports.
• I NTELLA P ATCH ACI-2058: An 11u switch with eighteen blade slots that supports up to
288 ports.
Note Indicates important information about the product.
CAUTION
Indicates potentially hazardous situations which, if not avoided, may
result in minor or moderate injury, or damage to data or hardware. It may
also alert you about unsafe practices.
WARNING
Indicates potentially hazardous situations which, if not avoided, can
result in death or serious injury.
DANGER
Indicates imminently hazardous situations which, if not avoided, will
result in death or serious injury.
I NTELLA P ATCH Switches
A PCON I NTELLA P ATCH switches employ
a modular chassis/blade design that
work with a variety of protocols and
data rates.
With this modular system, you can
populate each switch chassis with
different blades, deploying Ethernet,
SONET, Fibre Channel and other
blades in a single chassis, while
running every blade independently and simultaneously. This modular design also provides
cost-effective media conversion and scalability.
1. A “u” (unit) is 1.75" or 44mm.