Set the ip address, Access the switch, Use embedded software – MultiDyne ACI-2058 User Manual
Page 17: Install optional software
I
NTELLA
P
ATCH
Switches: ACI-2058 User Manual
A54-2058-000
13
A
PCON
, Inc.
3.5.
Set the IP Address
For details, see
3.6.
Access the Switch
3.6.1.
Use Embedded Software
The following software is embedded in your ACI-2058 switch. These applications are
immediately available for use without reconfiguration or installation:
•
W
EB
X, an embedded web interface.
•
A
PCON
C
MD
X, a command line interface.
•
Firmware Direct Commands, ASCII programmatic access.
For usage details, see the appropriate software User Manual.
3.6.2.
Install Optional Software
To communicate with the switch from a host computer, you can use C
ONTROL
X, included on
the CD-ROM that comes with the ACI-2058. To use C
ONTROL
X, install it on the host computer
you plan to use to control the ACI-2058:
1. Insert the CD into the host computer, or download the latest version from the A
PCON
website:
2. Follow the onscreen prompts.
You are now ready to connect the ACI-2058 to a host. For details, see
.
Figure 3. ACI-2058 Rear Panel