Measurement Computing StrainBook/616 - Manual (Page 40)

File
The File menu provides four functions:
New Configuration Set all parameters to their default startup setting.
Load an Existing Configuration Load a saved sensor calibration configuration.
Save Current Configuration Save the current sensor calibration configuration for later recall.
Return to WaveView Exit the Sensor Configuration window and return to WaveView.
Calibration
The Calibration menu provides two functions:
Take a Single Reading This command allows the user to take a single reading and display the values in
the Sensor Configuration window.
Calibrate Enabled Channels This command will calibrate all enabled channels.
Password
The sensor calibration application provides password protection. If you calibrate any StrainBook channels
[or WBK16 expansion channels] and then choose the password protection option WaveView will prevent
other users from making changes to your calibration file. The Password menu provides three functions:
Enter Password Use this command to enter a previously selected password, enabling you to
change parameters.
Set a New Password This command allows the user to select a 4-7 character password. A message
box will prompt you to enter a new password. Type a password and press
“enter”, or click on the “OK” button.
Clear Password This command clears the password protection. A message box will prompt you
to enter the current password. Type the current password and press “enter”, or
click on the “OK button.
4-10 Software 967594 StrainBook/616 User’s Manual