Measurement Computing StrainBook/616 User Manual
Page 39
To open the Sensor Configuration [Calibration] window, click on WaveView’s Sensor
Calibration button. The button is depicted at the left and pointed out in the upper portion of the
previous figure. You can also open the window from WaveView’s System pull-down menu.
You can use the Sensor Configuration window’s File pull-down menu to Load an Existing
Configuration. This option opens a standard dialog box that allows you to select and open the
desired file.
Sensor Configuration Main Components
Sensor Configuration [Calibration] Window
Sensor Configuration Toolbar and Pull-Down Menus
Control functions in the sensor configuration window are available through the pull-down menus or the
toolbar. For descriptions of button functions, see the related menu selections. Note that some menu
selections have no corresponding button.
Sensor Configuration Window Toolbar
1 – New Configuration
2 – Load an Existing Configuration
3 – Save Current Configuration
4 – Take a Single Reading
5 – Calibrate Enabled Channels
6 – Return to WaveView
StrainBook/616 User’s Manual
967594
Software 4-9