Measurement Computing StrainBook/616 - Manual (Page 137)

Appendix A 977194 Using the Daq Configuration Applet with StrainBook A-5
• IP Address Setting Panel : From this panel the user can select one of two radio buttons.
o
The first is Auto IP Setting. If selected, the software will automatically derive the Internet
Protocol Address. To do so, the serial number of the device must be entered in the Serial
Number field. The resulting IP address will appear in the IP Address text box.
o
The second radio button is labeled Manual IP Setting. This feature can be used when the IP
address is already known. When the “manual” radio button is selected the desired address
can be entered into the text field.
• OK: Click on the OK button to store the configuration and exit the current dialog box.
• Cancel: Click on the Cancel button to exit the current dialog box without storing any changes.
• Apply: Click on the Apply button to store the configuration. Or you can click the Test Hardware tab.