Measurement Computing StrainBook/616 - Manual (Page 124)

11-10 Troubleshooting 9\68594 StrainBook/616 User’s Manual
How to check for the existence of a DHCP Server
1. Open the Control Panel by navigating from the Windows Desktop as follows:
Start Menu ⇒ Settings ⇒ Control Panel.
2. Double-click Network and Dial-up Connections icon.
3. Double-click the Network Connection icon for the network that the StrainBook is connected
to.
4. In the Local Area Connection Status box, click on the button.
The Local Area Connection Properties box will appear.
5. Double-click the “Internet Protocol (TCP/IP)” component.
The Internet Protocol (TCP/IP) Properties box will appear.
6. Verify that the “Obtain an IP address automatically” radio button is selected.
7. Get the computer IP configuration settings using the ipconfig command.
8. Verify the DHCP Enabled value in the ipconfig output is set to “yes.”
9. Check the output of the ipconfig command for Lease Obtained and Lease
Expired
lines. The presence of these lines indicates that there is a DHCP server on the
network. If this is the case, notify your network administrator and follow the instructions in
your network device documentation. The instructions should have a heading to the effect of:
Configuring a Device on a LAN with a DHCP Server.
WaveView Issues
•
•
•
•
•
•
Acquisition parameters can not be changed during an active acquisition.
International settings are supported, but some text boxes may not completely show the comma when it is used as the
decimal place holder.
The Scope Mode’s print resolution is determined by the host computer’s video driver. Some graphics drivers may
require adjustment of the resolution and/or color palette for proper print operation. For some printers, better output
is attained by changing the printer's dithering setting to "None".
Scope scale changes do not become effective until the focus changes. This is best accomplished by hitting
.
Text boxes for the filter settings may not display the proper setting if the number entered must be rounded to the
nearest filter setting. This is a problem only with the number displayed and does not affect the actual filter setting
that is passed down to the driver.
Conversion to Snap Master format from the menu option is not supported. Snap Master format conversion does
work properly when done as part of a direct-to-disk acquisition.