Epiphan VGA2USB Pro - Manual (Page 91)

14. Recording image files Configuring image file recording options
User Guide Page 91
14.Recording image files
You can use the information in this chapter if you are planning on
using your Epiphan Frame Grabber and Epiphan video capture
application to record the images captured by your Frame Grabber
as a series of individual image files.
This chapter describes:
•
Configuring image file recording options
• Setting display options to change how image files are recorded
• Recording image files
• Viewing saved image files
Configuring image file recording
options
You should review and modify image file recording options
before recording captured images as image files. Using image file
recording options you can control the format of the image files,
control the file naming system used for saving the image files,
and determine whether to save all captured images or to be
selective in the images that you capture.
To configure image file recording options
1 Start the video capture application.
2 On the Tools menu select Options.
3 On the Recording tab select Record Images.
4 Configure the following options and select OK or Apply to
save your changes.