Epiphan VGA2USB Pro - Manual (Page 142)

18. Advanced topics Configuring image adjustments
Page 142 Epiphan Frame Grabber
Prefer wide (16:9) VGA modes
This checkbox, when enabled, allows Wide Aspect Ratio VGA
modes to be displayed by the video capture application window.
The Epiphan USB device driver may not be able to determine
whether the video source is sending a wide video mode signal.
You can select this option if your video source uses a wide video
mode to make sure that the Epiphan USB device driver selects a
wide video mode.
Resetting image adjustments
Use the following procedure to turn off image adjustments
settings so that image adjustments can return to being set
automatically.
To reset image adjustments
1 Start the video capture application.
2 From the Capture menu select Configure Device.
3 Select the Adjustments tab.
4 Disable all types of image adjustments by clearing all
checkboxes.
5 Select OK.
6 Close the video capture application.
7 Disconnect the USB cable from the video capture workstation
or from the Frame Grabber and wait at least 10 seconds.
8 Reconnect the USB cable.
9 Start the video capture application.
Image adjustments are now set automatically again.