Epiphan VGA2USB Pro - Manual (Page 17)

5. Connecting a VGA2USB Device
User Guide Page 17
To connect a VGA2USB (including LR, HR, and Pro)
Make sure that the video capture application is installed on the
video capture workstation before connecting the Frame Grabber.
1 If you are connecting a VGA2USB LR, HR, or Pro Frame
Grabber, connect the power adapter to the Frame Grabber.
2 Use the VGA cable to connect the VGA signal output source to
the Frame Grabber VGA port.
You can use a VGA splitter to split the VGA signal between an
external monitor and the Frame Grabber, (not recommended).
You can also use the VGA adaptor if your VGA signal output
source has a male connector.
3 Use the USB cable to connect the Frame Grabber to a USB 2.0
port on the video capture workstation.
Video Capture
Workstation
Equipment with
VGA Signal Output
VGA
Cable
USB
Cable
VGA Signal
Output
VGA Input
Power/Status/
Capture LEDs
USB Output
Power Input
(LR/HR/Pro)
USB Input