Epiphan VGA2USB Pro - Manual (Page 150)

18. Advanced topics Windows command line options
Page 150 Epiphan Frame Grabber
Creating a Windows shortcut that uses command line
options
You can use video capture application command line options by
creating a Windows shortcut to the video capture application
executable file and editing the shortcut to add command line
options. In the following procedure, the video capture application
executable file v2ugui2.exe has been installed in the folder
C:\Program Files\VGA2USB DVI2USB KVM2USB\.
1 Open Windows Explorer and navigate the following path:
C:\Program Files\VGA2USB DVI2USB KVM2USB
2 Right click on the file v2ugui2.exe and select Create Shortcut.
Windows creates a shortcut file that, depending on your
Windows settings, may be named “Shortcut to
v2ugui2.exe.lnk”. The “.lnk” may not appear if Windows does
not display file extensions. You can change the name of this
file and copy it to another location if required. Don’t change
the file extension.
3 Right click on the shortcut file and select Properties.
--gain <#> Set the gain (contrast)*. The range is 0 to 255.
--noesc Enter this parameter so that you can disable
exiting image only mode by Pressing the Esc
key. You can always press Alt+F4 to exit from
the video capture application.
--topmost To keep the video capture application window
on top.
*See “Configuring image adjustments” on page 136 .