Epiphan VGA2USB Pro - Manual (Page 51)

12. Windows video capture application
User Guide Page 51
12.Windows video capture
application
This chapter describes common functions and features of the
Epiphan video capture application. Most of the information in
this chapter describes the Windows 2000, XP, and Vista version of
the Epiphan video capture application. However the information
in this chapter also applies to the Linux version of the Epiphan
video capture application software.
Note: For information about the Mac OS X version of the Epiphan
video capture application, see Chapter 13. “Mac OS X video
capture application” on page 79 .
• For details about how to record images or video, see
Chapter 14. “Recording image files” on page 91 and
Chapter 15. “Recording videos” on page 97 .
• For details about how to broadcast captured images over the
Internet, see Chapter 16. “Web Broadcasting” on page 121 .
• For details about how to set up KVM, see Chapter 17. “Using
the KVM2USB Frame Grabber” on page 129 .
• For special advanced topics, see Chapter 18. “Advanced
topics” on page 133 .
• For many useful How To procedures see the How To page of
the Epiphan Web Site.
This chapter assumes that you have followed the instructions in
the Frame Grabber Installation Guide shipped with your Frame
Grabber and also available as chapters 2 to 10 of this User Guide.
To start using this chapter you should have:
• Selected a video capture workstation that meets the system
requirements described in your install guide and in
Chapter 2. “System Requirements” on page 11 .
• Successfully installed the Epiphan USB device drivers, and
video capture application on the video capture workstation as
described in Chapter 3. “Installing the Windows
VGA2USB/DVI2USB drivers and application” on page 12 .